+86-13579271170 +86 17391613973        shacman@shacman-truck.com
You are here: Home » Dump Truck » SHACMAN F3000 Dump Truck » Shacman China Factory F3000 6X4 Dump Truck 10 Wheel Good Performance

Shacman China Factory F3000 6X4 Dump Truck 10 Wheel Good Performance


Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
Driving type:6*4
Max. Speed:75km/h
Engine Brand:WEICHAI
Engine Model:WP12.430E201
Transmission Brand:FAST
Front axle And Rear axle Brand:HANDE
  • SX3255DV384


  • 8704230090


Weichai Power

Weichai Power is the Largest powertrain group in China and the largest high speed & powered engine manufacturers in the world. It takes more than one-third market share in China and the quantity of the world exceeds 3.5 million units.

Technology leader in industry, with the only State Key Laboratory of internal combustion reliability, modern state-level enterprise technology center and the first-class product experimental center in China.

Weichai four-valve enginehas strong power with large output torque,at lower engine speed.It is the best power and explosive foree in the industry.

■Weichai power: High horsepower engine combined with AVL and BOSCH building the golden power. Engines are custom made for SHACMAN vehicles with intelligent energy saving system that can automatically adjust to vehicle weight.

■Fuel efficiency: Utilizes BOSCH advanced high pressure common rail technology reducing fuel consumption to as low as 189g/kw.h and low speed matching small rear axle. King of high speed transport.

■High performance: High displacement with higher horsepower and more low-end torque. Better acceleration and greater reserve torque.Electromagnetic clutch fan, fuel system protector and intelligent fuel switch.

■High reliability: Weichai Landking WP engine is the result of collaborative and synchronous development with the world's best auto parts suppliers, fully integrated with the world's cutting-edge technology to build the engine of the golden supply chain.

■High comfort: Low speed engine not only improve the economy and prolong life expectancy, but at the same time also reduces engine noise, ensuring better driving environment.

■Advanced configuration: Equipped with high efficiency electromagnetic clutch fan, fuel system protector and intelligent fuel switch.

Cummins power

■Cummins power: Supplies SHACMAN vehicles with custom built ISM series fully electronically controlled engines with intelligent controls, excellent power, five key steps in the global system and 1 million kilometers major maintenance free.

■Cummins ISM series engines integrates the five key subsystem: Intake air handling system, combustion optimization system, electronic control system, fuel system,

filtering system and post processing system.

■Power ranges from 308 to 440 horsepower, maximum torque is rated at 2 100 Nm and maximum rotation is rated at 2130 rpm.

■Great low speed torque, fast aceleration, great climbing ability.

■Weighs only 940 kilogram, great power to weight ratio.

■New oil sump design reducing noise levels. Electronically controlled high pressure fuel system allowing high pressure atomization of diesel oil in cylinders and precise injection.

■Electronic control system includes cruise control, vehicle speed control and over 100 other functions. The system makes sure the engine is in the best shape,features highly integrated module design and uses 30% less parts; greatly reducing failure rate.

■Strong interoperability of spare parts, serialization of a high degree, easy repairs.

■Ultra long filter and oil change interval, significantly reduce the cost of daily maintenance. The filtration system utilizes Cummins Fleetguard 1003 FS filter. Its 10 micron Stratapore filter technology is designed specifically for the protection of

parts with filtering efficiency is high as 98.7%.

■Intake and exhaust system uses Cummings HX55 Holset turbocharger. The waste gas bypass valve can be automatically adjusted according to the need of air flow, achieving four levels of control within the revrange and is best suitable for high

power rated engine.

■The use of the world's most widely used and the most mature heavy-duty diesel engine braking system --- JACOBS engine brake system. The system can absorb 85% of the vehicle's inertia force with maximum braking capacity of up to 326

horsepower. Drivers are able to go downhill in a higher gear and thus increasing efficiency. The engine is not supplied with fuel while going downhill, even further increasing fuel efficiency.


■FAST is the largest manufacturer and distributors of heavy-duty transmission in the world, whose annual output rank industry first in China for 15 years and rank first in the world for 12 years, and the quantity of the world exceeds 7 million units.

Hande axle

■Hande axle: Advanced axles utilizing imported German MAN single stage reduction axle technology as well as heavy duty off-road military truck axle technology,Super load carrying capacity tested over 1.3 million times without failing.

■Economical: Hyperbolic gear structure, axle assembly gear ratios of 3.336 3.7 4.111 4.625 with high transmission efficiency, suitable for the development trend of low speed and high horsepower engines. Transmission efficiency 10% higher than

competing domestic products with 10% 17% less fuel consumption.

■High reliability: Optimized design and finite element analysis of axle shell guaranteed the bearing capacity of the shell. Robot welding is used in the construction of the axle shell. Spindle nose utilizes friction welding technology, increasing loading capacity and eliminates impact load de formation.

■Safety: Brake shoe with widened variable cross section allows better heat dissipation, breaking power and improves the efficiency of friction plates.

■Powerful: Primary and secondary gear single stage reduction, high transmission efficiency, 50000Nm high torque output ensuring easy operation of the vehicle.

■High usability: Utilizes full wheel side oil lubrication, great heat dissipation, non disassembly maintenance feature, equipped with external brake drum and allows the changing of the friction plate without removing the wheel.

■Lightweight: Axle shell cross section 150X135, Steel plate thickness is 14mm.



Welcome contact me anytime

Phone/WhatsApp:+86 15319763307


we'er built huge sales network in central Asia and Russia, treat every customer sincerely, with tenacity and stick to service every customer, layout with a diversification strategy to support our confidence in the central Asia market constancy.


shacman@shacman-truck.com  NO.2327, 23rd Floor, No.1 Building, Jingwei International Center, North Side of West Section of Xijin Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
     +86 17391613973
© Copyright  2022 SHAANXI HE XIN SHENG HUA TRADING CO.,LTD . All rights reserved. | Sitemap