SHACMAN X3000 380HP Weichai WP10 Diesel Engine 6x4 30 Ton Mining Dump Truck Quarry Tipper Vehicle

The SHACMAN X3000 380HP dump truck is built for operations where engine power makes the difference between profit and downtime. At the core of this truck sits the Weichai WP10.380E32, a 9.726-liter inline-6 turbo diesel that produces 280 kW at 2,200 rpm and peaks at 1,600 Nm of torque from as low as 1,200 rpm. This means fully loaded starts on 15% quarry ramps happen without straining the driveline.

Engine and Drivetrain

The WP10 series has been running in mining fleets across Africa, Southeast Asia, and South America for over a decade. Mechanics know this engine inside out, which keeps downtime short and spare parts available off the shelf. Paired with the FAST 10JSD160 10-speed manual gearbox and a 430 mm single-plate diaphragm clutch, the torque delivery stays predictable whether you are crawling through soft overburden or running on haul roads at 50 km/h.

6x4 Chassis That Takes a Beating

The double-reduction drive axles and 3800+1350 mm wheelbase give the X3000 a tight turning circle for a truck this size, while the multi-leaf spring suspension front and rear balances ride comfort with load stability at full GVW. The frame rails use 8+8 mm double-layer construction at the high-stress sections around the cargo body pivot and rear suspension mounts. This is where lighter trucks crack welds after a year of rock loading. The X3000 holds up.

Mining-Spec Cargo Body

The 5800 x 2300 x 1500 mm cargo box holds roughly 20 cubic meters heaped. Floor thickness is 12 mm with 8 mm side walls, both in high-tensile HARDOX-grade steel. The single-cylinder front-lift hydraulic system tips to 50 degrees. A cab shield extends over the roof to deflect rocks during top-loading by excavator.

What Mine Operators Actually Care About

• ZF hydraulic power steering keeps the wheel light even at crawling speed on uneven ground.
• The 400-liter fuel tank runs a full 10-hour shift without refueling.
• 12.00R20 tires are standard mining spec, available from any tire distributor in mining regions.
• Air dryer and water separator on the brake circuit are standard, not optional extras.

Applications

Open-pit coal, iron ore, limestone quarry, copper mine overburden removal, aggregate stockpile management, and large-scale earthmoving on dam and highway projects.

We ship these units regularly to ports in Lagos, Mombasa, Dar es Salaam, and Durban. Stock units available for immediate inspection at our yard in Shaanxi. Factory warranty covers 12 months or 100,000 km on powertrain components.