Buyers compare purchase prices. Fleets compare cost per tonne kilometre, because that is the number that decides whether a contract is profitable. The two figures often point at different trucks. Here is the cost structure we see across mining and construction fleets, and the parts of it owners can actually move.
| Cost line | Share of running cost | What moves it |
|---|---|---|
| Fuel | 35 to 45 percent | Route profile, driver behaviour, axle ratio, tyre pressure |
| Tyres | 15 to 20 percent | Haul road maintenance, alignment, load distribution |
| Maintenance and parts | 15 to 20 percent | Service interval discipline, parts quality |
| Driver and insurance | 10 to 15 percent | Shift pattern, retention |
| Depreciation | 10 to 15 percent | Specification fit, resale market, hours |
These percentages shift with the site. On a flat quarry loop with good roads, tyres fall and fuel rises. On a wet pit with sharp rock, tyres can pass 25 percent, and no amount of driver training fixes it, only road maintenance does.
The same truck can differ by 8 to 12 percent in fuel burn depending on axle ratio and tyre choice. A ratio that is too tall for the route makes the driver hold a lower gear on every ramp, and the engine runs off its sweet spot all day. When we quote a tipper we ask for the route profile, not just the payload, because a heavy haul tipper specified for a flat haul behaves differently on a 9 percent ramp.
A truck standing still costs the same per day as a truck working, plus the lost tonnes. In practice, one unplanned engine stop per month on a 20 hour operation costs more than a year of oil filters. That is why the fleets with the lowest cost per tonne keep a small shelf of fast movers: starter motors, belts, filters, brake chambers and a spare fan clutch. The parts cost is trivial, the avoided downtime is not.
Take annual tonnes, divide by payload per trip to get trips, multiply by round trip distance for kilometres, then divide annual cost by tonne kilometres. Do it once with real fuel receipts and once with the specification you are considering. If the difference is under 5 percent, buy on service and parts availability instead of price. If it is over 10 percent, the specification is wrong and no discount fixes it.
Send us your route profile and annual tonnes and we run the comparison against two or three dump truck specifications for you.