Most tractor truck enquiries start with horsepower. That is the wrong end of the conversation. The trailer decides the specification: its loaded weight, its height at the kingpin, and whether it needs a wet kit or a hydraulic pump. Get those three right and the engine choice usually makes itself.
Add trailer tare weight to payload to get the gross combination weight, then add 10 percent for gradients and wind. A 40 tonne GCW on flat highway and a 40 tonne GCW through a mountain pass are different trucks. On flat work a 380 to 430HP engine with a fast axle ratio will hold highway speed and return better fuel. On repeated climbs, the same load wants 480 to 550HP and a numerically higher ratio, otherwise the driver spends the day in a low gear and the fuel saving disappears in the climb.
| Route type | Ratio band | Effect |
|---|---|---|
| Flat highway, 80-90 km/h cruise | 3.08 to 3.36 | Low engine speed at cruise, best fuel figures |
| Mixed regional with grades | 3.7 to 4.1 | Balanced, holds top gear on moderate climbs |
| Mountain or heavy haul | 4.4 to 5.2 | Pulls away loaded without clutch abuse, higher fuel burn |
Changing a ratio after purchase is a differential rebuild, not a warranty adjustment. It is the single most expensive specification mistake on a tractor, and it is made more often than any other.
Standard trailers want a fifth wheel around 1,150 to 1,250 mm. Low deck trailers and container chassis need it lower, and a tilting or sliding fifth wheel with a greaseless top plate removes most of the coupling complaints drivers raise. Wheelbase follows trailer body length: too short and the trailer nose loads the tractor unevenly, too long and the turning circle suffers in yards. Give us the trailer drawing, not just the model name.
Tyre size on the tractor must suit the trailer deck height, or the combination ends up nose high with uneven bogie loading. Wide base singles save weight and roll better, but they need a smooth surface and a driver who checks pressure weekly. On the fifth wheel plate, grease is fine but it attracts grit; a greaseless top plate costs a little more and removes a weekly task the workshop rarely gets done.
Trailer type and drawing, loaded trailer weight, route profile and the steepest grade, plus the required fifth wheel height. With those four we quote a tractor that pulls the trailer properly instead of one that merely fits the coupling. Browse the full tractor truck range for reference models.