Drivers and workshop managers who move from diesel to electric often assume the service book gets thrown away. It gets shorter, and two items get added. Here is the schedule we recommend for the X5000e, and the parts worth keeping on the shelf.
| Interval | Work |
|---|---|
| Every shift | Tyre pressure and cuts, brake air pressure build, coolant level, visible cable and connector check, charger plug condition |
| 10,000 km or monthly | Brake adjustment and drum inspection, suspension and spring eye check, grease pins, check battery pack mounting bolts |
| 30,000 km | AMT oil, axle oil, coolant condition test, high voltage connector torque check by trained technician |
| 60,000 km | Battery health report, insulation resistance test, contactor inspection, low voltage battery test |
| Annual | Full high voltage safety inspection, charger service, body and frame crack inspection at cross members |
First, the high voltage system. It needs a technician with the right training and the right meter, and it needs a documented isolation procedure before anyone touches a connector. Second, the charger. A charger that fails overnight costs a full shift, so a spare connector set and a service contract are worth more than a discount on the truck.
Regenerative braking carries most of the retardation on a loop route, so linings last far longer than on a diesel. The drum still rusts, still cracks at the bolt circle, and still needs measuring at every brake adjustment. Inspect rather than assume, and keep a cast iron brake drum on the shelf if the fleet runs more than five units.
With the engine and its ancillaries removed, tyres become the largest consumable on the truck, followed by axle and AMT oil. Rotate on schedule, check alignment after any kerb strike, and keep the 5.571 drive axle oil changed at interval rather than topped up. Fleet managers moving from diesel usually find their first year parts spend drops sharply, then settles at a level set by tyres and brakes.
Any smell of hot insulation, any warning lamp on the high voltage side, any cable that looks chafed, and any charger that trips repeatedly. Drivers should log and report, never investigate. That rule protects both the driver and the warranty.
The full specification for this unit, including the 270 kW rated and 410 kW peak motor and the four speed AMT, is on the X5000e electric tractor page. For fleets mixing electric and diesel, our product range lists the shared cab and chassis parts that carry over.