| Brand Name: | SHACMAN |
| Model Number: | DZ97189570483 |
| MOQ: | 10 Pieces |
| Price: | USD 32-58 / Piece |
| Delivery Time: | 3-5 working days for stock, 15-20 days for production |
| Payment Terms: | T/T,L/C at sight,Western Union |
This is the electronic accelerator pedal assembly with part number DZ97189570483. The pedal arm, pad, bracket and the sensor socket are supplied as one unit, so you swap the whole assembly instead of chasing a worn potentiometer inside the old one.
When the pedal starts to fail, drivers usually report one of three things. The idle creeps up and the engine hangs at 900 to 1000 rpm. The throttle goes dead for a second when pulling away. Or the dash throws a pedal position fault and the truck drops into limp mode. All three come from the same place, the contact tracks inside the pedal, and none of them are fixed by cleaning the plug.
| Item | Data |
|---|---|
| Part number | DZ97189570483 |
| Type | Electronic accelerator pedal assembly |
| Signal | Dual channel potentiometer output |
| Mounting | Bolt in bracket, original footwell position |
| Connector | Original plug, no rewiring needed |
| Pedal pad | Rubber, anti slip pattern |
| Warranty | 12 months |
The pedal bolts to the cab floor bracket with two bolts and one plug. Read the fault codes before you pull the old pedal, then clear them after fitting and let the engine idle for two minutes so the ECU relearns the rest position. If the fault stays, the problem is usually the wiring loom to the cab controller, not the pedal.
Send us the truck model, the VIN or a photo of the old pedal with its plug visible. Two pedal versions are in use on Delong trucks and the connector keying differs, so the photo saves a return shipment.
Each pedal is bagged, boxed with foam and packed 10 pieces to an export carton. Neutral cartons are available for distributors who sell under their own label.