| Brand Name: | SHACMAN |
| MOQ: | 1 |
| Price: | Negotiable |
| Delivery Time: | 35-55days |
Urea, ammonium sulphate and NPK blends all draw water out of the air. Loaded warm, they sweat against the body floor, and what is left behind after tipping sets like cement. A body used for fertiliser and then for grain needs to be cleaned between loads — which makes the body design a maintenance question, not just a capacity question.
What makes the difference on this duty| Floor and side plate | Smooth internal faces so residue slides out with the tip instead of lodging in a weld seam |
|---|---|
| Body corners | Sealed joints, because a trapped pocket of fertiliser becomes a corrosion cell in one wet season |
| Tailgate seal | Tight enough to hold damp material on the road, easy to open for washdown |
| Wash access | Drain points at the low corner so a hose-down actually empties the body |
Tip the body, hose the floor and sides while the ram is still up so water runs out of the tail, then lower and flush the hinge line. Ten minutes at the end of a fertiliser run prevents the hardened crust that takes a chisel to remove a month later.
| Model | SHACMAN F3000, 6x4 |
|---|---|
| Engine | Weichai 380HP, Euro 2, diesel |
| Body | 7200 × 2490 × 3668 mm, front lifting |
| Wheelbase | 3175 + 1400 mm |
| Rated load | 61-70 tonnes |
| Transmission | Manual |
If the body will run fertiliser most of the week, ask for a heavier floor plate and a sealed tailgate at order stage — retrofitting a seal onto a used body never works as well as building it in.
Fertiliser duty checklist