| Brand Name: | SHACMAN |
| MOQ: | 1 |
| Price: | Negotiable |
| Delivery Time: | 35-55days |
Operators who handle both packed oil products and general cargo do not want two trucks standing idle on alternate weeks. This X3000 6X4 is specified as a multi function lorry: a 3975 + 1400 mm wheelbase, a front lifting body for discharge work, a Weichai diesel at 380HP and a manual gearbox, with a 21-30 t load rating that covers both duty types.
Where the cargo is oil or lubricant in drums and cartons, the loading pattern is dense and low, so the body floor and the tie-down points carry more of the duty than the volume does. That is worth specifying against your actual pallet or drum dimensions rather than accepting a generic body.
Vehicle data| Model | X3000, 6x4 |
|---|---|
| Wheelbase | 3975 + 1400 mm |
| Engine | Weichai diesel, above 8 L, 380HP |
| Transmission | Manual |
| Body | Front lifting |
| Load rating | 21-30 t |
| Max speed | 75 km/h |
| Overall size | 7900 x 2490 x 3220 mm |
| Tyres | 12.00R20 bias |
| Tyre certification | ECE, GCC, ISO, DOT |
Tell us the load format you handle most often and whether you tip or unload by forklift, and we will confirm the body configuration.
Loading pattern decides the bodyOil cargo arrives either as drums on pallets or as cartons stacked by hand, and the two demand different bodies. Drums need a reinforced floor and lashing points at the right spacing; cartons need side access and a load height the driver can reach. For a multi function lorry serving both, a flat floor with removable sides and a set of recessed lashing rings covers the widest range without specialising.
Tell us the drum size and the pallet footprint you handle, and whether the vehicle tips at the delivery point or is unloaded by forklift, and we will specify the floor and side configuration to match.
Before quoting we normally ask for one more number: the weight of a typical full load. A multi function lorry is often ordered on volume and then run at weight, and the difference decides whether the body needs a reinforced floor and whether the rear axle specification should move up a step.
Product photos